DL485-MBR Series

For price and delivery information, please contact us on 0203 086 9569 or sales@industrialcomms.com

 

Contact Us

 

PRODUCT DOCUMENTS

INDUSTRIALCOMMS DOCUMENTS

MANUFACTURERS DOCUMENTS

Introduction

eks Engel DL485-MBR Series Fiber Optic Systems

The fiber optic systems DL485 connect field bus systems with RS485 interfaces. Optical linking allows safe data transfer and is suitable for MODBUS, MODNET-1/SFB, BIT-BUS, SAIA-S-BUS and several manufacturer-specific systems.

The fiber optic systems DL485-4W connect field bus systems with RS485 four-wire interfaces.

With the help of this innovative system optical bus, star, tree and mixed structures are possible.

LEDs and potential-free contacts of a fault detector relay are able to signal defective states.

FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error. fiber optic systems DL485 connect field bus systems with RS485 interfaces. Optical linking allows safe data transfer and is suitable for MODBUS, MODNET-1/SFB, BIT-BUS, SAIA-S-BUS and several manufacturer-specific systems.


Product Features & Specification

  • Terminating resistor    Switchable: none or wave impedance (Rw + Rpd + Rpu)
  • RS485 Cable length    1200 m (9.6–93.75 KBit/s), 250 m (500 KBit/s), 90 m (1.5 MBit/s)
  • RS485 Connector       9-pole Sub-D female and 6-pole terminal
  • Status-LEDs   Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView(red, yellow, green)
  • Power supply  12–30 VDC, other voltages on request
  • Power consumption    5 Watt, 200 mA (24 V)
  • Potential separation     500 VDC (24 VDC <> RS485)
  • Operating temperature            –40 °C – +70 °C (Multimode and Singlemode with ST or SC), –20 °C – +55 °C (all others)
  • EMC   EN61000-6-2/EN55022 Class B + A1 + A2
  • Weight 570 g
  • Dimensions     60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
  • Housing Stainless steel, powder coated

Part Number


Article no. P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
DL485-MBR 01000 7951 01000 7962 01000 7971 01000 7973 01000 7973-BIDI 01000 7981 01000 7983 01000 7985 01000 7983-BIDI
FO-connector ST ST ST SC SC ST SC E-2000 SC

 


Product Specifications – see datasheets in Manufacturers Documents